Thank you for your interest in the Resistor Variable Nonwire Wound NSN parts we have available for purchase on NSN Parts World. On this page, you can submit a quote request for Clarostat Sensors And Controls part number D6002921-1, a component that can also be found by inputting NSN 5905013420717 in our search engine. Other than this particular part number, we also carry an array of other high-quality items that have been sourced from leading global entities on our Approved Vendor List (AVL). Explore our vast catalogs by scrolling over to our menu and find products according to manufacturer, NIIN, NSN, and more.
Note : We Will Not Share Your Information To Any Third Parties.
At NSN Parts World, we work with a number of government and defense agencies, meaning that you can find items by their respective CAGE Codes, including 12697, and many others. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Clarostat Sensors And Controls parts under the FSC 5905 Resistors. As such, we invite you to confidently complete the RFQ form for NSN 5905013420717 or any other, and within 15 minutes or less of submission, one of our experts will reach out with a customized solution. For one-on-one assistance, contact via phone or email; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-342-0717 Item Description: Resistor Variable Nonwire Wound | 5905 | 013420717 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D6002921-1 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABJT | TERMINAL LENGTH | 0.250 INCHES MINIMUM |
| ABXF | SHAFT LENGTH | 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.781 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEEA | SWITCH TYPE | PUSH-PULL |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 30.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 4 OCLOCK AND AT 8 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | III END ITEM IDENTIFICATION | 5895-01-233-2919 COMMUNICATION SYSTEM CONTROL GROUP |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| TEST | TEST DATA DOCUMENT | 57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| AEGH | SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| PRMT | III PRECIOUS MATERIAL | GOLD |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND 300.0 MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | III CUBIC MEASURE | 0.195 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 DC |
The only independent
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote