Thank you for your interest in the Resistor Variable Nonwire Wound NSN parts we have available for purchase on NSN Parts World. On this page, you can submit a quote request for Clarostat Sensors And Controls part number WRS1G040S103B, a component that can also be found by inputting NSN 5905013489960 in our search engine. Other than this particular part number, we also carry an array of other high-quality items that have been sourced from leading global entities on our Approved Vendor List (AVL). Explore our vast catalogs by scrolling over to our menu and find products according to manufacturer, NIIN, NSN, and more.
Note : We Will Not Share Your Information To Any Third Parties.
At NSN Parts World, we work with a number of government and defense agencies, meaning that you can find items by their respective CAGE Codes, including 12697, and many others. Additionally, we utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find Clarostat Sensors And Controls parts under the FSC 5905 Resistors. As such, we invite you to confidently complete the RFQ form for NSN 5905013489960 or any other, and within 15 minutes or less of submission, one of our experts will reach out with a customized solution. For one-on-one assistance, contact via phone or email; we are available 24/7x365!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-348-9960 Item Description: Resistor Variable Nonwire Wound | 5905 | 013489960 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Wrs1g040s103b | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 292.0 MINIMUM AND 298.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 13.00 INCH-OUNCES |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 255.0 MINIMUM AND 265.0 MAXIMUM |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 5.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 4.0 -40 DEG CELSIUS SINGLE SECTION AND +0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND -3.0 TO 3.0 105 DEG CELSIUS SINGLE SECTION AND -4.0 TO |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 1.000 AC |
| TEST | TEST DATA DOCUMENT | 37695-228092 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| AEFL | MAXIMUM RUNNING TORQUE | 13.00 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| CBME | III CUBIC MEASURE | 0.159 CUBIC INCHES |
| FEAT | SPECIAL FEATURES | TERMINAL LUGS EXITING THE SIDE OF THE PART BODY RATHER THAN THE END |
| AAPN | SECTION QUANTITY | 1 |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFN | NONTURN DEVICE LOCATION | AT 10'30 OCLOCK |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | III END ITEM IDENTIFICATION | 5895-01-166-6949 DISPLAY BOARD,COMBAT INFORMATION CENTRAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.812 INCHES MAXIMUM |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
The only independent
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote